Search results
-
99 7.3 RPM Tach stuck
What could be the problem all of a sudden went to start truck and the rpm gauge is stuck all the way and won't move. Truck starts and runs fine thanks. -
rear spindle nut socket size
doing rear backing plates and need to know what size that socket is for the spindle nut. its on a 2008 f 350 thanks -
bad squeal
ok so i was just pulling onto the street and i hear this loud squeal had no brakes and no steering so i shut the truck off and after i got my friend to start the truck i noticed the crank spins but the belt doesn't move I'm thinking the fan clutch is seized there is a code for it also. -
-
randomly shuts down
got it scanned got these codes (p1280) injector control pressure ICP circuit out of range i changed this sensor along with the pigtail about 10k ago. (p0221) throttle position sensor/switch B perform. i knew about this one. (P0340) cam position sensor circuit fault also changed this sensor about... -
-
-
-
randomly shuts down
ill take a look maybe the nut is coming off thanks. any other way on checking it -
randomly shuts down
i have a 99 f250 couple days ago pulling up to a light and the truck shuts off i stop and it fires back up this also happened to me last week and it fires right back up. it almost feels like you turn the key it doesn't stutter or anything. i have changed my cps about 8000km ago so don't think... -
-
removing doors
I'm getting my truck painted and need the doors removed. how do i disconnect the wiring going into the door. do i need to disconnect everything in the door and pull them threw. thanks its a 99 ext cab -
levelling kit questions
not yet got to wait for the weekend to busy with work ill post some pics up when I'm done- mattl140
- Post #34
- Forum: 7.3 Aftermarket
-
-
levelling kit questions
ok thanks man and what about reusing the 4 bolts that is if i don't have to cut them.- mattl140
- Post #30
- Forum: 7.3 Aftermarket
-
levelling kit questions
got x codes new u bolts. will i be able to reuse the 2 bolts that holt the spring in and when putting the springs in will i need to unbolt the trac bar or will i be fine with just doing one side at a time. thanks- mattl140
- Post #28
- Forum: 7.3 Aftermarket
-
hopping and vibration
took my 305/55r20s with 20x12 -44 tires off and put my other tires and rims on and it drove nice no hopping but i did notice a slight vibration so i jacked the back up and put it in drive i noticed the vibration and the driveshaft seemed like it was warped like wobbling. -
levelling kit questions
when i get my x codes I'm going to get shocks do i get stock heights shocks or will i need different shocks up front with the x codes thanks.- mattl140
- Post #26
- Forum: 7.3 Aftermarket
-
hopping and vibration
its inline. the vibrations and hopping kinda clears up around 55 my shocks are pretty bad I'm going to be changing them soon with some bilsteins and some x code springs. -
levelling kit questions
i will let you guys know I'm going with the Xcode's thanks- mattl140
- Post #25
- Forum: 7.3 Aftermarket
Members online
No members online now.