Search results

  1. 97f350stroker

    Tire recommendations

    I know you said your not looking at Mt's but I've been running the Mastercraft Mxt for a while and have no complaints. Especially like the price tag.
  2. 97f350stroker

    OBS and 38's whats it gonna take?

    I'm not real sure but I think you'd be getting into probably 6-8 inch lift and most likely a high steer kit up front if you go 8 inches if you want to do it right. Depending on what you are planning on towing that may be a pretty big set up to run. I'd give Trevor at pmf a call he's a good dude...
  3. 97f350stroker

    Amarillo For Sale

    Dang the wife has been wanting an Amarillo for a long time now.
  4. 97f350stroker

    38r in a obs

    I recommend going to a t4 set up if you're planning on getting that far into it anyway. That way you are open to more options down the road to injector changes or whatever else you may want. A stock sd aluminum end intercooler is the best choice imo. Easy to mount and usually found pretty cheap...
  5. 97f350stroker

    Battery Light on and codes.

    Same thing happened to me when I had my 6.4, I had a thread on here also about it with pics. Ford dealer had the pigtail and it fixed me right up.
  6. 97f350stroker

    Stack on lifted trucks.

    I will never put stacks on another one of my trucks unless it's just a toy. I hate not being able to lean up against the bed or put the tailgate down and sit or grab anything out of the bed without scrubbing the soot off my hands.
  7. 97f350stroker

    need up pipes, input on a wallet friendly pair

    I bought the set from Rudy's when I did mine and pulled the trans to install them. Not too bad of a job but I didn't run into any really seized up bolts or anything, just a tight squeeze getting to a couple.
  8. 97f350stroker

    Fuel Pressure Drop

    ^agreed. I'm running a single sd pump with 230/200's and it never drops below 60psi. Running 1/2" to a y block in the valley then 3/8" to the back of the heads though.
  9. 97f350stroker

    200K decision time. 2017 or Cummins swap or ?

    But it's a Cummings everybody wants a Cummings don't ya know. Plus he hates the 6.4 so much that he put 200k on it. I don't get the point of this thread anyway I mean it sounds like you have your mind made up anyway.
  10. 97f350stroker

    Federal Couragia's

    Just put these on my truck. I ran the Mastercraft courset m/t on my obs crew before they came out with the mxt and really liked those so I figured I'd rock the mxt. So far so good, very quiet rolling down the highway
  11. 97f350stroker

    Federal Couragia's

    Buddy just put some on his dmax about a month ago and said he's already noticing them wearing like crap. Haven't heard him say anything about traction though. I've yet to see any m/t have good traction on wet pavement....
  12. 97f350stroker

    Let's talk lockers

    I'd have to look around for a reputable shop, there's not many around me that I know of.
  13. 97f350stroker

    Let's talk lockers

    What's the labor bill on something like that? I just have trust issues with other people workin on my stuff.
  14. 97f350stroker

    Let's talk lockers

    Speaking of which. Is there any good write ups on installing one? Never had the carrier out and would like be informed before I just go tearing stuff apart.
  15. 97f350stroker

    7.3 icp question/problem

    That high of a DC paired with low icp usually indicates a hpo leak somewhere. You can check icp mechanically while cranking to be sure that your hpop is good. If that checks out then I'd lean towards injector o-rings since you replaced the ipr already. Possibly improper install when the o rings...
  16. 97f350stroker

    95 rclb

    This is from when I was installing the turbo so the clamps aren't all on and the intake isn't on yet. That coolant filter is gone now also.
  17. 97f350stroker

    95 rclb

    Burgettstown pa about 25 mins west of Pittsburgh. Think the miles are at like 148k but will have to double check. I'm getting Mastercraft mxt's for it. I can get some interior pics after work today
  18. 97f350stroker

    95 rclb

    Putting my regular cab up for sale ONLY because I found a truck I'd really like to have. Truck will only be sold if this other truck is still available at the time. 95 rclb xl model P.I.S 230/200 injectors Billet s468 with irate t4 kit Studs, pushrods, and valvesprings T500 Efuel 6.0...
  19. 97f350stroker

    95 7.3 parts/partout

    Crap, mine is just an overflow tank. One hose going to it and not pressurized
  20. 97f350stroker

    95 7.3 parts/partout

    Any pics? Is it the early style that's just an overflow tank or is it the later style
View older results

Random media

IMAG0012
my first diesel and first truck, project white out
IMG_1069
IMG_0849
DSC01423
08733985
image155
Alexis
2011-10-05_18-10-39_989
20160924_133912
2011-10-01_22-08-42_792
Screenshot_2013-11-09-23-55-38-1

Latest posts

Members online

No members online now.
Total: 628 (members: 1, guests: 627)
Top