Search results

  1. O

    cracked front cover

    Like I said, this is the second one i've had. Both in the same truck with different engines. Thought maybe a bad design, that's why I'd thought I'd ask if anyone else had problems. If not, I don't know. If it was bad motor mounts, would see it hitting somewhere, and it would torque the other...
  2. O

    7.3 Highboy swap?

  3. O

    cracked front cover

    No, everything is free, and where it should be, not external pressure
  4. O

    cracked front cover

    I've got a 1996 leaking water. This is the second one and was wondering if anyone else had this problem or I'm just lucky. It's cracked right behind the top oil cooler mounting threaded hole. the crack makes a "L" shape, runs along the water port then goes up to the thread. Any Ideas...
  5. O

    7.3L Injector Pricing

    :popcorn:
  6. O

    Bent Glow Plugs

    is possible that they were torqued by ft lbs instead of inch lbs? looks like they were overtightened?
  7. O

    Batteries??

    don't think you would have enough cranking speed long enough with one battery. check starter draw also. as said before that kills batteries quick.
  8. O

    craigslist find, OBS with goodies

    could the glow plug delete have something to do with the remote start?
  9. O

    WTB: Transfer Case for an F250 6.0 ('04.5-'07)

    K couldn't see what kind it was !! worth a shout
  10. O

    WTB: Transfer Case for an F250 6.0 ('04.5-'07)

    i've got an obs with a carrier bearing in the rear drive line. I thought the same thing, transfer case sounded like chain slipping. replaced the transfer case, still did the same. got to looking and the carrier bearing was flexing so much the ujoints were hitting the fuel tank guard. Replace...
  11. O

    operating temps

    put the thermostat back in. 160 is waaay to cool for operating temp. diesel need heat to run properly, should be at least 190 if your running in cold weather, put a winter front on, and keep the temps up. Too cold coolant temps, fuel isn't completely burning.
  12. O

    Help with oil analysis results...what's goin' on?!

    No problem, spread out the pleats and let it dry over night, see what's in there. most likely a piston, but could be anything in the engine that's aluminum. Like someone else said, might want to change oil and run another sample again if the filter is clean or even if it has some metal in it...
  13. O

    Help with oil analysis results...what's goin' on?!

    are the pieces flakes, large pieces? the oil sample won't tell you that, and some samples don't read particles over a certain size.
  14. O

    Help with oil analysis results...what's goin' on?!

    did you cut a filter and see what it looks like?
  15. O

    Fuel Filtration - How much is enough?

    ya don't need any filter for it to work, but what kind of stuff are you letting into your injectors. Cat found that with a 2 micron filter, had a lot less problems with the heui injectors. Since the ultra low sulfer fuel, should run conditioner with every fuel fill.
  16. O

    Fuel Filtration - How much is enough?

    ya, i look an look and look, everyonce in a while i get lucky and find a deal.
  17. O

    Fuel Filtration - How much is enough?

    caterpillar dealer, some truck stops, most truck repair shops sould carry them. teps dealers, ebay
  18. O

    Fuel Filtration - How much is enough?

    there's room behind the left hood hing, mount the filter base on the fender. I just hate crawling under the truck to change filters lol. I also picked up a 252 6338 filter and water separator with the baseon ebay for $8. will put that in the line before the pump someplace. Still running the...
  19. O

    Fuel Filtration - How much is enough?

    I run a Cat filter, 1r0750 2 micron. for final filter, the small micron the better. used napa filter base and tucked it under the hood.
  20. O

    Junk d66

    We'll got the replacement turbo put back on, and it does work a lot better than the old one. Least the turbine wheel isn't draging on the compressor housing!! Was hopeing that it would clean up the smoke a little better, but after talking to beans finally, might be the injectors. Might clean...

Members online

No members online now.
Top