Search results

  1. PrecisionEngine

    6.4l Odawg Intake Review

    I'm not sure yet. I havent put on enough miles to be sure. Also, I'm seeing back pressure creep up higher than before when i'm past 1/2 throttle. I attribute this to the increased flow from the intake. Increase in flow on the intake side has to increase flow on the exhaust side. And my back...
  2. PrecisionEngine

    6.4 Gone. 2017 6.7 F350 Platinum In.

    The exhaust looks really good. Nice work!
  3. PrecisionEngine

    Miller 225 Portable Welder/Generator

    That's bad ass. I love old iron. Glws. Sent from my SAMSUNG-SM-G935A using Tapatalk
  4. PrecisionEngine

    6.4l Odawg Intake Review

    Last weekend i ended up having to replace one of my UP pipes unexpectedly. While i was at it, I took the time to install Odwag's intake since it was sitting on my shelf. I thought it would be worth the right up since: (1) usually nobody installs just the intake without any other modifications...
  5. PrecisionEngine

    Cracked Elite HD UP Pipe

    Well got it all done. I gusseted the weak spot on the egr provision. Thanks again for everyone's help and advice. Hopefully I don't have to do that again. Sent from my SAMSUNG-SM-G935A using Tapatalk
  6. PrecisionEngine

    Cracked Elite HD UP Pipe

    I thought about that as well. Thanks . Sent from my SAMSUNG-SM-G935A using Tapatalk
  7. PrecisionEngine

    Cracked Elite HD UP Pipe

    Gentlemen, i need some help. I've got a set of Elite HD UP pipes that cracked really bad. Do you think this is worth repairing? What do you think caused the failure? I believe the welds were not the greatest. Sent from my SAMSUNG-SM-G935A using Tapatalk
  8. PrecisionEngine

    295/60R20 vs. 295/65R20

    Does anyone have a new nitto terra grappler g2 in 295/60R20 they can physically measure the tread width for me? I just ordered a set of 295/65R20 and they are 1-1/4 narrower than my previous 295/60R20 terra grapplers (not g2) despite all specs saying they are same width. Sent from my...
  9. PrecisionEngine

    low compression on 1 cyl

    Geez. You need to find that voodo doll and burn it. Why dont you pull the plugs and run a compression test? I can send you mine if youd like. Also, you can get a boroscope in through the glow plug hole. I've done that several times while I had access to one. If you did, you can visually...
  10. PrecisionEngine

    torque converter locked up at stop light

    Dammit man. And if I remember correctly, all the 300M and 300 Maraging shafts were made by TCI.....
  11. PrecisionEngine

    torque converter locked up at stop light

    I just looked at my invoice, this is the same shaft I purchased back in 2015. I guess I will be in your shoes at some point. @ Sootie: You've been at this game a lot longer than most, do you remember what happened with these shafts failing? I know I remember reading about it....
  12. PrecisionEngine

    torque converter locked up at stop light

    So much for a billet input. I think theres a way identity the type of material used by some markings on the shaft. I remember reading where this was happening to a lot of guys who had upgraded. Sent from my SAMSUNG-SM-G935A using Tapatalk
  13. PrecisionEngine

    torque converter locked up at stop light

    Well that's a relief. Drill a small hole in the converter pilot. Stick a punch through and knock the input shaft out. Tig weld the hole closed. Buy new input shaft! Sent from my SAMSUNG-SM-G935A using Tapatalk
  14. PrecisionEngine

    torque converter locked up at stop light

    You have the ASTG manual? It's good enough to get you in trouble... Sent from my SAMSUNG-SM-G935A using Tapatalk
  15. PrecisionEngine

    torque converter locked up at stop light

    I found it online: see page 17.
  16. PrecisionEngine

    torque converter locked up at stop light

    Kleake, Try to air check the packs as you come apart. You can start this process once you pull the Solenoid body off and just before you pull the pump off. Despite some broken hard parts, it would be nice to know if you had a leaky pack that was causing the erratic shifting. let me know if...
  17. PrecisionEngine

    Best headlights

    That's the truth! That's exactly what I did. Brand new set of lights and retrofitted them. I was in close to $2k by the time I was done because I did this back in 2011 when my truck was roughly 9 months old. At that time, the pricing was much less appealing than it is today. Feel free to...
  18. PrecisionEngine

    Best headlights

    You will not be disappointed with a set of well done retrofits. I guarantee it. It's night and day. It's so noticeable, I won't own a vehicle without a set. Just from the sheer safety perspective. The width and clarity of light is very impressive. For instance, on my F250, on a two...
  19. PrecisionEngine

    Best headlights

    You know, a good amount of that can be buffed out. Depending how bad it is. If youre an a tight budget you could try that first.. Sent from my SAMSUNG-SM-G935A using Tapatalk
  20. PrecisionEngine

    Best headlights

    I've never tried on a superduty. I've had horrible quality issues with other makes and models. The plastic is just not the same quality. It's brittle and prone to breaking. Unfortunately retrofitting is so time consuming for me, i just dont bother with knock off stuff. I dont want to do it...

Random media

08 door panel
DAY_TWO_3_
Electric fuel
cleaning_axles
interior
eleanor_part_two_15_
20140706_190146
pinion failure
IMG_3629
67CatchCan
2012-07-08_18-47-05_287
IMAG0207

Latest posts

Members online

No members online now.
Total: 1,088 (members: 0, guests: 1,088)
Top