Search results

  1. R

    Another cold start issue

    I heard a click.. I'll have to check again what the other terminal shows.. Now I can't remember Sent from my iPhone using Tapatalk
  2. R

    Another cold start issue

    Ok just checked the not always on terminal to ground with key on and it showed 11.6 for about a minute then dropped to .01 That seems normal right? Sent from my iPhone using Tapatalk
  3. R

    Another cold start issue

    At the same time.. Is that wrong? Sent from my iPhone using Tapatalk
  4. R

    Another cold start issue

    Ok... Just tested the relay. Battery showed 12.57.. Always hot terminal showed 12.57. THEN, when I touched both big terminals with the key still OFF, it showed 12.57.... Turned key to on, it dropped down to 0.3 volts Sent from my iPhone using Tapatalk
  5. R

    Another cold start issue

    So what should the voltage be across the two large terminals with the key on? Sent from my iPhone using Tapatalk
  6. R

    Another cold start issue

    IIRC it showed about 11.9 across the relay.. I can check again when I get home. Thanks for the link!! Sent from my iPhone using Tapatalk
  7. R

    Another cold start issue

    I believe it was a snap on solus.. I was surprised as well that it was giving the reading in amps.. I assumed it would show voltage Sent from my iPhone using Tapatalk
  8. R

    Another cold start issue

    I was using a scanner Sent from my iPhone using Tapatalk
  9. R

    Another cold start issue

    Not the new ones Sent from my iPhone using Tapatalk
  10. R

    Another cold start issue

    On a working gp system, it will show X amount of amps for 10 seconds or whatever.. I am getting voltage at the glow plugs with the key on, I have tested that.. but according to the scanner no amperage...... Mind blown Sent from my iPhone using Tapatalk
  11. R

    Another cold start issue

    Well as I stated a few posts ago, the scanner said glow plugs had 0 amps for 0 seconds before starting.. I just can't pinpoint why Sent from my iPhone using Tapatalk
  12. R

    Another cold start issue

    Well I have had this setup with these tunes through a few winters with no problems and last winter was when it developed this issue Sent from my iPhone using Tapatalk
  13. R

    Another cold start issue

    I have been running amsoil for many years so I don't think there's an issue there. I have tunes from Beans and it's the same in any tune. Since you mentioned the scan tool, I remember I had borrowed one and it showed that the glow plugs had 0 amps for 0 seconds before starting. What is causing...
  14. R

    Another cold start issue

    I'm a little confused by that Sent from my iPhone using Tapatalk
  15. R

    Another cold start issue

    Haven't checked compression.. If I had to guess its probably fair to poor.. I used to have the ccv mod routed to the rear of the truck but it kept filling with oil and I got tired of the smell. I routed it back to the intake and I get a LOT of oil residue in the intake, IC pipes etc... I'm...
  16. R

    Another cold start issue

    The 205/100's are stage 3 injectors from Full Force Diesel... Have about 20k on them Sent from my iPhone using Tapatalk
  17. R

    Another cold start issue

    Thanks for the welcome! The starter is original. I was hoping to solve a low voltage and cold cranking amps problem with new batteries but now that I think about it all of the battery cables are original as well and even with new batteries I was only getting 11.somthing volts at the gp relay.. I...
  18. R

    Another cold start issue

    I just created this account through tapatalk so if you need more info about the truck I'll be glad to tell. It's a 99.5 with 264k. I live in Colorado and this past winter it developed a good ol' no start when it's cold problem. Ive had the truck for ten years now so I've been here before. I...

Latest posts

Members online

Top