Search results
-
30lb of boost on 38R
It does idle like it has a cam, but sounds sweet. It also sings when its on the dyno WOT run. Just a quick burst up into 3rd. But my EGTs hit 1400 in about 200mtrs so I backed off.- ChunderDownUnder
- Post #106
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
recharging laptop can you read that alright- ChunderDownUnder
- Post #101
- Forum: 7.3 Aftermarket
-
-
30lb of boost on 38R
for the life of me I cant find PW desired and actual all I have is pulse width- ChunderDownUnder
- Post #96
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
charged the intake again and my boost gauge is correct. The slight leak down is coming out the green tube where it fits into the Garret intake tube- ChunderDownUnder
- Post #94
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
keep getting your message is to short. It really is pissn me off- ChunderDownUnder
- Post #93
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
Finally got AE up and running. Now what do I need to monitor to start the trouble shooting ???- ChunderDownUnder
- Post #90
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
Correct and now a EGT issue as well Agreed. Either that or I have done something wrong I have a telescopic camera I use for that purpose. The clamp and pipes are where they should be. Charged the waste gate and it opens and closes. The temps stay up after I take my foot off. Then slowly...- ChunderDownUnder
- Post #86
- Forum: 7.3 Aftermarket
-
-
30lb of boost on 38R
charged the intake again and sprayed at will. No bubbles. Superglued my old map sensor and blew some air and no bubbles, so i put it on and went for a spin. Still the same .10-15lbs of boost and I can hit 1200 Egts before it gets into 3rd. Weird thin tho, it aint blowing smoke.- ChunderDownUnder
- Post #72
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
well im stuffed. after doing all that and putting in the WWII Im struggling to hit 15lbs boost now and my EGT's are through the roof. Have checked everything and it looks right. I had to replace my Map Sensor as well. Cracked the original while doing all this.- ChunderDownUnder
- Post #71
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
Just did a leak test through the intake with everything back in. It will leak down but it is very slow ??- ChunderDownUnder
- Post #67
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
now that sounds like fun. Shall do Matt- ChunderDownUnder
- Post #65
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
theres different types, isnt there ??? or am I just looking for a "Load Dyno" ??- ChunderDownUnder
- Post #63
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
shall do. In regards to the dyno. Like I mentioned it was my first time and didnt really ask the questions I should of. Want to make sure I dont repeat that again. What do I need from my dyno. eg. a certain type. load etc.- ChunderDownUnder
- Post #61
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
The reason for the investigation is that Im down on HP as well. Should be easily in the 500 range. This is one step and I tend to agree. The charge system looks fine. I tweaked the wastegate a bit and with the WW 2 I might see a rise on boost. When I get it back together I will book the dyno and...- ChunderDownUnder
- Post #58
- Forum: 7.3 Aftermarket
-
30lb of boost on 38R
Nah Matt, gotta say I didnt ask- ChunderDownUnder
- Post #55
- Forum: 7.3 Aftermarket
-
-
30lb of boost on 38R
Intercooler checks out OK. Held pressure- ChunderDownUnder
- Post #52
- Forum: 7.3 Aftermarket
-
