Search results

  1. G

    P1276 fault code troubleshooting

    Working on a '97 powerstroke and it runs good but has started to idle erratically at times. The fuel pressure is within spec and no DTCs are present. The P1276 (Cylinder #6 High to Low Side Fault) occurs when an injector buzz test is performed. The UVCH has been recently replaced along with the...
  2. G

    97 Powerstroke PCM issue and Fuel Pressure help needed.

    After getting a friend's truck running, I have been putting some miles on it to verify it is ready to be returned. The truck was running great and a check engine light illuminated; the truck immediately lost power. The key was cycled and the power returned again only to have the same issue...
  3. G

    Bolt location/identification help

    After having several guys work on his truck, a friend had it delivered to my home in hopes of getting it reassembled and running. Many items on the top of the motor had been removed and placed in a single box without labels. I have everything back together and the truck is running but three...
  4. G

    4" Downpipe for 6.0

    Looking to purchase a 4" downpipe to fit a 2007 F250 powerstroke. MBRP and Diamond Eye are no longer offer this size downpipe. Thank you.
  5. G

    Quality OEM replacement front bumper for '05-07 F250

    Does anyone have experience with a supplier that provides a high quality OEM replacement front bumper for the '05-07 F250/350? Ford has these marked as obsolete and I am trying to avoid fit/finish issues. Thanks.
  6. G

    WTB: 04-07 OEM chrome front bumper

    Looking to purchase a damage-free OEM chrome front bumper to fit a '05-07 F250. Prefer the whole front bumper assembly with upper cap if available. If an aftermarket mfg. makes a replacement bumper with the fit/finish of Ford, please let me know. Thank you.
  7. G

    Ported 7.3 heads

    Does anyone have pictures, of the intake area of their 7.3 ported heads, they would be willing to share? I am looking for increased performance for a daily driver/play truck and not full-on racing/pulling. Considering attempting the task myself. Thanks.
  8. G

    6.0 Fuel pressure question causing no start?

    Still working with a no-start issue. The fuel pressure builds to approximately 45psi when the key is cycled but quickly drops back to zero if the truck isn't started. I am thinking this has something to do with my truck not starting so I am questioning if this quick drop in pressure is normal. I...
  9. G

    WTB: 7.3 Billet Rods

    Looking for a set of billet rods (Crower, Manley, Carrillo) for a 7.3 power stroke. Wanted to check here before ordering a new set.
  10. G

    '02 F250 Dataport connection wiring diagram

    Does anyone have a wiring diagram/pinout for a '02 F250 7.3 dataport connector (ODB II plug)? Have an older tuner (Infinity) that is able to connect and pull error/trouble codes but not able to upload my tunes to the truck. Thank you.
  11. G

    WTB: 6.0 FICM Logic board

    Looking for a good logic board half of a 4 pin FICM for a '07 6.0. Thanks.
  12. G

    6.0 Starting Issue

    New to 6.0 powerstrokes and having trouble getting my '07 to start after replacing heads & head gaskets. Using AE, the FICM voltage is 48 and the injector pressure slowly builds to 1650-1800psi. The batteries are in good condition holding full charge. Have attempted to start ten or twelve times...
  13. G

    WTB: Bellowed up-pipes for H2E kit

    Looking for a set of bellowed up-pipes for my '02 7.3 with Hypermax H2E turbo kit. Thanks.
  14. G

    WTB: Injector rebuild tools(7.3)

    Looking for tools to rebuild 7.3 powerstroke injectors. Anybody have a used tool set they want to sell? Thanks.
  15. G

    6.0 o-ring head question

    Had a set of 6.0 heads o-ringed and noticed one of they cylinder's ring had a small gap between the wire ends. The other cylinders' didn't appear to have this gap. The machinist said the small gap wouldn't be an issue but I wanted to see if anyone had any experience with this issue. Thanks.
  16. G

    6.0 IPR wiring heat shield

    Is the heat shield on the IPR wiring needed and if so, does anyone have the OEM part number for it? Considered aftermarket thermal jacketing but it won't fit like the OEM part. Thanks.
  17. G

    Wanted: Radiator fittings for 99-03 Superduty

    Looking for a pair of the fittings that thread in to the radiator for the transmission cooler lines. These are 5/8-18 SAE male to 5/8-18 SAE female. Need these to fabricate a fitting for a Mishimoto radiator installation. Thanks.
  18. G

    Mishimoto radiator transmission fittings

    Installed an aluminum Mishimoto radiator in my 2002 F250 and the radiator's threaded holes for the transmission lines don't match my truck's fittings. The adapters that came with it also don't mate to my truck's transmission lines. Removed the fittings from the original radiator and they don't...
  19. G

    WTB: Stealth billet HPOP

    Looking to purchase a Stealth BILLET HPOP stage II or III. Needs to be complete. Wanting to purchase one to disassemble for measurements. Thanks.
  20. G

    WTB: (1) 20x12 Weld Dune wheel

    Looking for a single Weld Racing 20x12 Dune wheel.

Random media

20170409_175923
10256451_10202966494876302_392901310128639215_n
Screen_Shot_2014-06-04_at_8_46_42_PM
IMAG0202
1591
Nate_in_all_his_Glory
Picture_058
Blackstone_1-27-17
IMG_36321
photo_2_5_
front_axle_swap7
17TowRig

Latest posts

Members online

No members online now.
Total: 488 (members: 0, guests: 488)
Top