Search results

Mine quit last year, turned out to be the valve on the passenger side firewall next to the vacuum canister. There is a rubber diaphragm in the lower part of it and that was torn.

Welcome, from Tuttle, OK

Maybe we could make a little trade...I'm finishing up a new engine install in my 03 6.0. You have seen it in person. Its got some recent hail damage also to be fixed, otherwise, its pretty clean. New 6.0 (reman) from Ferd with EGR delete.

Yes I did. The Unison ring was stuck pretty tight to the base housing and I couldnt hammer a thin blad putty knife between them so I'm sure mine hasnt moved in a long, long time. If you have more than about 60k miles on your truck, its the same way. Garrett told me these turbos need removed and...

There will be a system ready to purchase from BFT real soon.

You say he rebuilt the turbo? Did he clean and polish the vains and unison ring and base under the unison ring and then coat it all with anti seize? It should be moving freely. If not this would be the result. Just got done rebuilding mine and it was pretty dirty and stuck. Also its common...

20k miles on current system with design changes being produced now.

They are known to bypass a lot of dirt and dust the engine.

When you said KN intake, that was enough to scare me off.

Thats a great question and I'm curious too.

I got the PMF track bars and they are great. 800 bucks I think with 4" lift blocks.

You are spot on. WVO on the other hand is VERY lubricating and injectors quiet right down with it.

Nice setup ya got there Mr. Ski... :thumbsup:

Ditto this. heat the oil to 150*, gravity feed into a Simple Centrifuge at 8-10 gph and oil will be clean and dry in one pass. I've tried all the other methods with varying results and nothing comes close to the perfection I get from fuging.

Yes, I have the first prototype Vegistroke system on my 6.4 and its working well with a few negatives that I am working to redesign. Once i get the design changes finalized, I'll send them to BFT and a few new prototype parts will be manufactured and I will install it all and test it some more...

Its really beautifull...;)

Number 165 here.