Search results

Looking for 8 8x6.5 dually wheels for a trailer I just picked up. Steel will be ok but 4 aluminum wheels would be a plus. Would also consider 4 17.5 single wheels if anyone happened to have a set sitting. Let me know! Thanks Ben Sent from my SM-G973U using Tapatalk

New in box, only opened to be sure everything is there. Trading in my truck before I got a chance to install. Part number is 92730 05-18 F250 and F350 with a 3" lift minimum according to the website. Asking $250 plus shipping. Thanks, Ben Sent from my SM-G973U using Tapatalk

Trading in my 14, these are about a year old. Black/smoked lense, white leds, and amber scanning/flashback turn signals. Asking $85 plus shipping. Thanks, Ben Sent from my SM-G973U using Tapatalk

Looking to buy a set of oem lugnuts for my 14 F350. 05-16 superduty should all be the same from my research, paypal ready. Thanks, Ben Sent from my SM-G973U using Tapatalk

Diesel RX/airdog fuel sump, too big to fit the flat portion on my tank, only taken out of the box to find out it wouldn't fit. $116 new on summit racing, asking $100 shipped. P/N: DRX09SMP Thanks, Ben Sent from my SM-G973U using Tapatalk

Sorry if this is in the wrong section, and I did try to search. I purchased some cablights for my 14 f350, it does not have them factory. Does anyone have the Ford part number for the harness that I will need? If so, are there different harnesses for different options, I have a sunroof, and...

I got a lot of sockets at an auction, built me a set, and had several duplicates. All name brand. Snap on, proto, williams. I figure half the price of new will be a good starting point, and I can ship in flat rate boxes. Here is all of the snap on sockets, I will add the others when I get...

This is my wife's cousin's truck, and I have not been able to personally look at it yet, but he has a mechanic who I have talked to and he seems like he knows what he's doing, and it is a problem I haven't heard before. Hpo system is always perfect, ficm always syncs, has good supply and...

Just saw today warren diesel injection is releasing a DIY kit to make a stroker pump. Not much further details yet, I am definately curious though!

In great shape, asking $350. They run just under $700 new. I would ship if buyer wishes to pay shipping, otherwise I am located in 62243 about 45 minutes east of st. Louis. Thanks, Ben Sent from my SM-G892A using Tapatalk

Moving and dont want to bring this stuff along if I dont have to and would rather help someone else out. Obs Airbox $20 94.5-95 coolant overflow jug. May work on the idi trucks too? $10 Misc obs intake pieces $make offers Obs throttle pedal and both switches $100 Superduty icp sensor, it is a...

Have several lights I've accumulated, and trying to clean up before I move. 99-07 sd rear taillights $50/pair 88-91 maybe 92-97 also obs rear tail lights $10/pair Obs front headlights mixed and matched parts make offers F250 badges $10 each? Hate to throw it away and dont want to bring...

Fabricated mount I ran on my 7.3 puller, I am also including a Caterpillar turbo from a c15 it's a s410 75mm compressor, 91 turbine, in a wastegated 1.27 housing. $750 for everything. Shipping in the buyer. Thanks, Ben Sent from my SM-G892A using Tapatalk

Custom built by kentucky clutch, it is a dual disk sintered iron clutch I had spec'd for 1,000hp. Billet flywheel, all sfi certified. Clutch has around 20 pulls on it. It's just been sitting on the shelf since I went with a cummins powerplant. $850 obo Fabricated T6 turbo mount for 7.3...

I have most parts for someone to do a ZF swap, can sell parts different ways but would like to try to sell complete at first. Zf5 42 4x4 trans, could use a rebuild it was a little noisy. $500 1356 transfer case $150 CCLB front and rear driveshafts(front is not a double cardan) $250 ZF floor pan...

Up for sale are fabricated up pipes, pedistal, oil feed and drain fittings. It is made for obs manifolds, which can be included if you want to run this on a superduty. I ran a large s400 turbo with this setup. Asking $500 Thanks! Sent from my SAMSUNG-SM-G890A using Tapatalk

Selling a dodge dana 80 that has the perches relocated for an obs. 4.10 gears and full spool. This is a much stronger axle than the factory sterling. $500 obo Located 62258 Thanks, Ben Sent from my SAMSUNG-SM-G890A using Tapatalk

This was in my pulling truck, has about 20 hooks on it since rebuilt. .020 over, motorcraft rebuild kit New valves New injector cups Arp head studs Smith bros pushrods Comp 910 springs shimmed Factory forged rods The timing cover will need to be resealed, and I will if i have time. Reason for...

Selling my 7.3 stuff, injectors i got used from another forum member i sled pulled about 20 times with them, fresh oil change every other hook, and always at 60 psi fuel pressure. On the gen 3 i bought new from swamps in June of 2015 and has the same run time as the injectors. Prices are...

Truck is a roller, no engine or transmission. Originally a big block gas truck but most recently had a 12v cummins. 97 front clip Dana 60 kingpin front Dana 80 rear Full spools in both axles Traction bars 4" lift 15 gallon fuel cell Rear suspension stops Front weight bracket Truck was basically...