Search results

I think the 6028 was/is bar and plate design and the 7016 is a tube and fin design Sent from my iPhone using Tapatalk

Pm replied to Sent from my iPhone using Tapatalk

I have one. It’s missing the compressor housing backing plate. I can let it go for $50.00 plus shipping. Let me know if you are interested. I just did almost the same thing. I used the 300x turbine wheel and billet compressor wheel and a ported housing. You will be very happy. Sent from my...

I was planning on using the existing and moving them forward then modifying the e-brake cable brackets. Sent from my iPhone using Tapatalk

Thanks for the help. If I understand correctly it doesn’t matter what leaf spring count is, as long as it’s 11 or newer. I thought the 2 or 3+ 1 were the most desirable. I ride unloaded most of the time. When I do do tow its usually not very heavy. I suppose I can get air bags if needed. Sent...

I have been wanting to do the leaf spring swap/upgrade. I have been having a difficult time locating the 2011+, 2+1 or 3+1 leaf spring packs. Most of the ones I have been seeing in the local bone yards have been 5 or 6 Leaf packs. My question is are there specific models or spring codes to look...

Order placed. Thanks Sent from my iPhone using Tapatalk

Looking for front bump stop brackets. I think they are HC3Z-3A089-A. I have dc3z-3020b bump stops. These are larger in diameter and do not fit in the existing brackets (5C34-3A089-A) 2005 4x4 f250 Sent from my iPhone using Tapatalk

Someone correct me if I’m wrong. Those ICP numbers seem really high for idle speed. Those numbers reflect what would be WOT conditions. You might want to double check the unit of measure. If those numbers are correct and the IPR is working correctly, I’d be curious to see what that thing is...

I have a set of 4” blocks that I will be removing from my truck. This weekend. The are not OEM. They a fabricated. With bump stops. I can send pics when I get them out. Pm me if you are interested. Sent from my iPhone using Tapatalk

Not sure where it runs they the pcb board. Do you have constant and switched 12 volts at the 2 wire connector on the alt? One is powered through a fusible link at the starter solenoid and the other is fused. There are ton of videos on YouTube. There is one video that has a damaged wire for the...

Wow!! That sucks! I’m sure it’s a quality product as with all mishimoto products. Without the radiator fittings you cannot fully utilize the product. You should have sent it back. Why support a company that will not provide 100% support for their product? Sent from my iPhone using Tapatalk

Can I get a quote for the front axle bump stops on a 2006 f250 4x4? I think this is the pn, DC3Z-3020-B Sent from my iPhone using Tapatalk

If you can get me a pn. I though the difference was the length of the up pipes. I check to see it will work. Sent from my iPhone using Tapatalk

Are they the same as the E99? I have one Thats never been installed. I ordered it for a E99. Do you have a PN? I’d let it go for cheap. PM me if interested. Sent from my iPhone using Tapatalk

Sprags maybe? Sent from my iPhone using Tapatalk

Ride is good. Road noise is not too bad. You know you are running m/t’s. Good street manors. I would buy them again. Hope this helps Sent from my iPhone using Tapatalk

LAstroke, I bought these tires a little over a year ago. I like them. Good wear characteristics. Typical M/T gotta keep them rotated. Sent from my iPhone using Tapatalk

Looks like he reduced it to $2500.00 Sent from my iPhone using Tapatalk

Nope. Some have plastic end tanks. Some have aluminum end tanks. Also i believe the inlet and outlets are different sizes between plastic and aluminum end tanks 3” vs 3 1/4” Not sure what years have what. Maybe someone that knows more will chime in. I have an e99 and it has the aluminum end...