Search results

Kinda getting ready for when it goes...fluid is still nice and clean but it doesnt shift all that consistent and slips into 6th quite often (jumps up about 400-500rpm before getting into gear). Im not looking to do anything crazy with this truck at all, just make it a reliable driver and tow...

I got a 2015 F350 with the factory nav and what not. Just picked up a gooseneck and am looking to make it easier and faster when hooking up myself by getting a camera set up. Factory, it has the backup camera in the tailgate. Is there some kit that I can get to install a 3rd brake light...

So, from my manual I should be finding 4 pass through wires, a yellow, green/brown, violet/green, and brown under the hood by the fuse box in the back left corner. I can not find those color wires anywhere there, I did find 4 wires taped to the harness though that I would imagine have to be...

Are the backs of these seats cooled too? The base of the seat is the only thing that cools on mine, I dont get any on the back of the seat, is that supposed to be cooled as well? If so, anyone know the fix for that? I havent looked at it, or taken anything apart yet.

So I have a cracked LF wheel, currently has 20x9 XD Series wheels on it with 275/65r20 GY Wranglers. They rub on my mudflaps, but clear everywhere else. I dont really want to make it any worse. What wheels/tire combo are you guys running on these trucks? Want to use the same tire for now, so...

Complete interior, dash to back seat, door panel to door panel, sunroof to carpet. Great condition, only flaws are the steering wheel the top leather is ripped off the wheel, and a small rip at the seam on the drivers seat, can be sewn up. $2000 for everything. PM me with a phone number for...

2013 box, tailgate, tail lights, and bumper. No rust on box or tailgate, in great shape. Spray in bed liner. $1800 Custom front fenders, steel fenders with 2013 wheel arch to match box, great shape as well. $1000 For the box, tailgate, tail lights, both bumpers, harley headlights, harley...

2013 box, tailgate, tail lights, and bumper. No rust on box or tailgate, in great shape. Spray in bed liner. $1800 Custom front fenders, steel fenders with 2013 wheel arch to match box, great shape as well. $1000 For the box, tailgate, tail lights, both bumpers, harley headlights, harley...

Im sure this has been asked a lot, just dont have time to search pages of forums. Going to be getting a 2014 or 2015 6.7L within a couple weeks here. I am looking to get some things ordered so that when I get the truck, I can just bolt some stuff on, throw a tune on and go. I know the 6.0...

So this started this winter. Started off with my truck jelling up, it was like -10 for a week, and I was heading into work going 65, then just fell on its face and i was doing 30 until i could hit an exit, then in stalled out on me. Got it fired back up and drove it a mile or so back home and...

Have a friend, just did head studs on an engine that was out of the truck. He did studs, and egr ******, then put it in a different truck. Did not do stand pipes, or dummy plugs or stc fitting. But anyways, gets it in, and it cranks but wont start. I went over with the scan tool and ICP...

So my stock radio just pooped it self. Wont play my cds, and wont let me get them out either. Looking to replace it, ideally with a touch screen double din...at least i think that is what they are called. What do you guys have in these trucks that basically fits right it, just an adapter for...

Got home Saturday night, truck was running and starting just fine. Went to start it Sunday morning, cranked but no start. Went to work got the scanner, ICP would top out at about 195 after a long crank...got an ICP sensor at work today, just got done sticking that fuker in, long crank no...

I bought this to build it over the winter but priorities changed. It is completely disassembled and ready to be built. It was pulled at 83k when an injector tip broke (#8). So the #8 piston is chewed up and a little bit on the head but not on the seats or valves. All cylinder walls are in...

What would I have to change to go to the late style hpop on my 2005?

I got a set of injectors and want to get them flowed to see i they are any good. One injector tip is broke off and chewed up the piston, so I dont know what can be done there, but basically want to know if they are any good and if i can build those to somewhere around a 225/75. im leaning...

these parts are all pretty much best offer OEM fuel pump, holds pressure just fine. put a new pump in and it was the same pressure, so my fuel pressure guage was the culprit. 5r110 stock torque converter, 85k on it. good condition. factory exhaust manifolds. a lovely factory egr cooler...

So I picked up this motor from a couple of hill billies for 800 bucks. of course they said it ran perfect when pulled with no issues. still wasnt surprised to find issues when pulling it apart. [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] My...

I can get a 2005 complete for 1200 bucks, he thinks a couple injectors are bad, but you never know until you tear into it... my question is would that be a nice thing to buy and potentially build, or should i do that to my early 2004? there are more options for more oil in the late motors...

So this started with me getting a new box because mine was starting to rust. So I found a 2013 take off with the box, tailgate, bumper, and lights already painted my same color for 1000 bucks. I got the box on and was kinda fine with the differences in the wheel arches, but I took some chrome...