Reply to thread

Message: [QUOTE="co04cobra, post: 154890, member: 666"] Bought a 02 F550 XL 4x4 95Kmi. with the idm,pcm,starter,Ac compressor, and fuel pump missing. The truck has also been setting for quite sometime. I have replaced all things above as well as the cps. Truck will not start. While cranking icp will go up to 3000psi and DC will go as high as 65ish%. Hpop Res. is full. Also have fuel in the bowl. A few other things I have found odd. My scanner will not communicate with the GEM and there is no VSM on the firewall behind the radio. Looks like it didnt come from the factory with one? The studs do not have the paint cleaned off them and there are no plugs for it? I assumed all 02s and 03s all have VSMs??? Is it possible it doesnt just b/c its a 550? One other thing I tried was swapping out the fuse box as I have had them cause no starts before, but no this time. What am I missing? Can anybody confirm that 550s would not have a VSM. Thanks for any help. [/QUOTE]

Verification

Random media

Truck36

At least a stroke is pullin the stroke

slayer1

joe_hueser_black_front

rear_axle_12_

0823191949

texas_truck_flyer

LED_Tail_1

2011-11-23_12-26-15_64

securedownload_1_6_

Latest posts

S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Today at 10:27 AM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ

Members online

No members online now.

Total: 808 (members: 0, guests: 808)

Top