Reply to thread

Message: [QUOTE="co04cobra, post: 877472, member: 666"] Behind the glove box the blend door actuator sets on top the heater box. 2 or 3 tabs hold it in place. You have to lightly pry up while pushing the tabs together to get it to pop out. Once you get it out, plug it back in and more your knob from hot to cold and see if its working. Other thing to do before that is confirm what the ECTs are at your upper and lower rad hoses and going in and out of heater core. If everything is good at both places the rheostat on the heater control itself occasionally goes bad. On edit: The a/c will and needs to cycle on every setting but floor only. [/QUOTE]

Verification

Random media

stickers

IMG_20160731_162838682

tire2

photo_37

e5da5bbd

Ben's 96

FullSizeRender1

eleanor_part_two_73_

20170106_170559

13_icon_sideview

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 575 (members: 0, guests: 575)

Top