Reply to thread

Message: [QUOTE="powerjoke4life, post: 1515614, member: 4382"] Need help! My brother is out in Wyoming with a 2005 6.0, truck runs fine and then will die, usually at lower speeds without as much airflow. Once it dies he gets the wrench on the dash and the scan tool won’t get connect, IT WILL NOT CRANK OVER , fuel pump won’t even come on. Open the hood for a few minutes, and it goes away back to normal. One thing that is weird is he is getting a 2psi EBPS reading at idle and 25psi ya WOT, tried unplugging it after it died with no change. -FICM is holding 48v -Coolant temp right around 190 -Oil temp right around 200 -Alternator output right around 13.2 (reading from the alt post) -Battery wires inspected and clean -fan clutch plugged in and working I’m at a stop here boys, where do I have him look next? Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

Pic upload test

409709_10150691653049729_624257566_n

20140904_154837

capped

Bella as puppy

truck31

302060_221937014532106_100001474272705_623803_897536092_ncopy

Lookin good

Screen_Shot_2014-06-04_at_8_46_42_PM

100704_1904101

The Truck

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 183 (members: 0, guests: 183)

Top