Reply to thread

Message: [QUOTE="HaysKSFirefighter, post: 702853, member: 587"] Ok, for those that sub'd and were looking for info. I've done quite a bit of research around the axle tube, hub, and bearing sizes for the 80 comparing the new 8x200s to the older 8x170s. Turns out they are all the same sizes, so in theory one can just pull a hub off an old axle and throw it on a new one to convert the bolt pattern. I still need to check some measurements on the brakes, widths and some other things to make sure that would work and all it would take for the front is removing the dually adapters. It'll be slow going, but I'll keep the thread updated with my findings. [/QUOTE]

Verification

Random media

photo_1_1_

yoda

motor_w_manifold

Absolute Performance 6468 and Piping Kit

IMAG1370

IMAG0329

new paint all shined up

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Today at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 966 (members: 0, guests: 966)

Top