Reply to thread

Message: [QUOTE="madman1234509, post: 655635, member: 3910"] Or you could put a 3rd gate in. My set up will 1 gate on each up pipe. Both bypassing the small turbo. Then a 3rd exiting the hot pipe between turbos to open and bypass the large turbo and into thr downpipe to limit ebp/boost. Both gates bypassing the small turbo can be run off the same regulator. You could make it simpler and keep it equal by deleting one of the gates off the uppipes and running 1 gate from both up pipes. I really like what he is doing here. If it hasnt been answered yet, what is the ar of the stock lp turbo and do you have any concerns with it spooling. Def could be a budget minded compound build [/QUOTE]

Verification

Random media

Interior

maple_grove_104

photo_8_1

my 97 PSD

Betsy_on_DYNO

d60_2_

raptorbfg

10.25 carnage

ImageUploadedByAG_Free1382811871_095052

IMG_20130404_213127_414

IMAG1096

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 757 (members: 0, guests: 757)

Top