Reply to thread

Message: [QUOTE="rosspulliam, post: 1469383, member: 20868"] I've been saying I was going to do this for 3 years now and haven't so, while I continue to be a lazy ass on my write up, I scanned in all of my notes that I used and took for this project and will share them here. Everything I needed to figure this out is in the PDF attachment. My notes should be pretty helpful as I took careful notes of what each pin does and what wire I connected to what. I'm assuming you are going to use all factory switches (the power fold/adjuster and power telescope switches). You can mount them how you want (and extend wires as needed). The telescope mounting bracket is a rear mounting bracket so I had to cut it up and glue it to the back of my dash after careful sanding and lots of test fitting so the switch sat the way I wanted it to in the hole I cut in the dash (with paper template). It was tedious. The factory adjuster/fold switch I mounted in the original 2002 spot, just used a carbide burr to hog out the hole enough to fit after making a paper template. It was a little bit loose but a couple strategically placed dabs of 3m Weatherstrip Adhesive solved that problem. For power fold you MUST use the Ford power fold relay for the switch to work right (p/n 8C3Z-14N089-A). That's what I can think of right off the top of my head. Since I finally dug out my notes I'll see about that write up that has been 3+ years in the making! [URL="https://1drv.ms/b/s!AsOJOjXhktqKjIp3CRKPAB2Wgp1agQ"]Find the PDF attachment of all of my notes by clicking this link![/URL] [/QUOTE]

Verification

Random media

2001_Durango

FullSizeRender1

IMAG0873

Dashdaq custom mount by Ricky

20130813_072937

led_tail_4

In progress

engine

246835_166853036711691_100001609875209_422855_2678983_n

16994152778_284378979_IM1_06_565x421_A_562x421

IMAG0315_1

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

projectford

Total: 1,214 (members: 1, guests: 1,213)

Top