Reply to thread

Message: [QUOTE="CUZICAN, post: 1402885, member: 15883"] The wheels are 24x12 -40 American forces 38x13.50r24 Nitto Trail Grapplers, lift is 8" Mcgaughy's in the front all powder coated illusion purple with Fox 2.0 reservoirs, Fox dual steering stabilizers, and the rear is Fabtech 6" lifted leafs with stock 2" block all powder coated illusion purple with Fox 2.0's. I had to do some minor trimming on the inside of the front bumper and had to cut the bottom off of the outer bumper bracket, but it's nothing visible from the outside. I also had to trim the inner fender liner on the passenger side. With this offset wheel, I don't think it would have been possible to do less lift without significant cutting or an aftermarket bumper to make some room. I don't really have any more pics as is right now, everything I had was on my phone that died, but here is a few I found. [/QUOTE]

Verification

Random media

1997 Dually

No limit intake

My 6.0 Powerstroke

101431-I-like-it-a-lot-gif-Dumb-and-D-XKuE

My Baby :)

Dropped on 4800lb. coils and no blocks

i/c pipe

slotted_flange

2013-01-06_17-11-25_142

B8A736D8-78F7-41B2-8CF1-D5C3021769CD

IMG_20140122_091341_060

2012 f250 sagging

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Griffin

Total: 770 (members: 1, guests: 769)

Top