Reply to thread

Message: [QUOTE="markfuga, post: 1394497, member: 10964"] The sway bar mounts are the originals from the 05 donor; I cut them off and welded them to the 96 frame. They absolutely will not work with the 96 radiator support in that position. The 96 support sits in that area and will not fit with the sway bar mounts I welded there. I'll be modifying the 78 radiator support with parts from the 96 support so I can easily compensate where needed. Going into the weeds a little: I made a transfer jig on the 05 frame before removing anything. Then I used that jig on the 96 frame to locate the spring perches, sway bar mounts, traction bar mount and the steering stabilizer mount. This is how I located the sway bar mounts where I have them. The engine is a tight fit against the firewall. I'l be doing sheet metal work for the down pipe, turbo and back of the drivers side cylinder head. Plenty of room on the left/right with the original inner fenders and lots of room up front for the radiator. [/QUOTE]

Verification

Random media

The Truck

IMG_20111107_182520

Hx40 comp map 7.3l data

IMG_20111001_135247

tuning_extrem_1210432794_37854

cp4

my stufff

elite_ccv2

1997 ZF5 DRW

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Yesterday at 8:05 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

No members online now.

Total: 668 (members: 0, guests: 668)

Top