Reply to thread

Message: [QUOTE="jcarrick, post: 1348687, member: 17712"] I figured I would post up some stuff about my truck and see if anybody's interested. I have been seeing a lot of posts about doing a coil/linked/radius/super duty, etc. suspension setup and figured I'd share what I have done with mine. My truck is a 1997 F350 CCLB with a 215 P-pump 12 valve cummins mated to a ZF5 and has been converted for the last 50k miles. The current engine setup is: -HT3B 23cm, HX35 12cm with drilled wastegate and slightly hogged out divider. -5x.012 injectors -055 delivery valves -3k gov springs -AFC Live -215 pump at 20* timing -5" downpipe, 4" exhaust -Freshly milled head (50k ago) with oversized OE cummins gasket -Stock head bolts, torqued to 130lb's. All the holes in the block were tapped and all the bolts were chased with a die to make sure everything was clean and would torque properly. Heres a pic of the truck currently: [ATTACH=full]162397[/ATTACH] For the past year I have been working on developing high end aftermarket products for OBS Fords and have been using mine as truck to test everything out on. I just finished a 3 link front end with coilovers that we are turning into a kit for other OBS owners. Here are some of the pics of that stuff: [ATTACH=full]162398[/ATTACH] [ATTACH=full]162399[/ATTACH] [ATTACH=full]162400[/ATTACH] [ATTACH=full]162401[/ATTACH] [ATTACH=full]162402[/ATTACH] [ATTACH=full]162403[/ATTACH] [ATTACH=full]162404[/ATTACH] [ATTACH=full]162405[/ATTACH] [ATTACH=full]162406[/ATTACH] [ATTACH=full]162407[/ATTACH] [ATTACH=full]162408[/ATTACH] [ATTACH=full]162409[/ATTACH] [ATTACH=full]162410[/ATTACH] [ATTACH=full]162411[/ATTACH] This setup rides and drives amazingly! Everything is tig welding and cut with a CNC plasma table. Here are some of future plans for this pickup: -Hard coolant lines, clean up the wiring, coolant filter system, remote oil filter, etc. -Dodge AAM 11.5 rear end with self leveling airbag/link setup in the rear. -Subframe that will reduce the crazy frame flex these trucks have. I am meeting with a mechanical engineer for coming up with a good design that wont lead to cracks in other areas of the frame. I am sure I am forgetting a ton, but I figured I would share with you guys and see what you think! :Cheer: -Jon [/QUOTE]