Reply to thread

Message: [QUOTE="JCart, post: 1375176, member: 1238"] Looks very nice indeed J Carrick, question wondering why not have a plate that bolts to the stock D60 spring pad with u-bolts, then the trailing arms are bolted via boxed in tabs aft at rear of plate. On top side of plate above stock spring pad are a set of vertical tabs the shock/coil bolts to. Then use the stock mounts for an adjustable pan hard bar. In this way a shade tree like me could roll a stock D60 under a 4x4 or 2x4 and bolter up. Rear trailing arms at frame end could be bolted on. Once everything was bolted up if shade tree wanted he could weld too. In this way you'd have a bolt on system.... Thanks, jrc [/QUOTE]

Verification

Random media

joestruck5

eleanor_part_two_15_

1997 ZF5 DRW

IMG_20110903_1824331

08_F-250

efi_vs_dd

1997 ZF5 DRW

Lite

Big_Red20

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 505 (members: 0, guests: 505)

Top