Reply to thread

Message: [QUOTE="bismic, post: 1562614, member: 1537"] There are TWO Syncs. ScangaugeII will retrieve BOTH PIDs (FICM Sync is separate from Cam/Crank Sync). If you need the programming for either one of those on the ScangaugeII, I can post it. Are you not getting EITHER of those to Sync, or is it only one of them that you are missing? Some people seem to think that if you have FICM Sync you MUST have cam/crank Sync, but that is not true. Many documented cases of having FICM Sync and not cam/crank Sync, I can give you the ScanGaugeII programming for either one of those two PIDs. P0118 is the coolant temperature sensor. IIRC it is a v-reference sensor. Unplug it and see if that changes anything. P2285 may have been thrown when you tried starting with the ICP sensor unplugged. Lastly, when you replaced the cam sensor, was there any rust on the block where the cam sensor rested against? If so, it doesn't take much to keep the sensor from working properly. [/QUOTE]

Verification

Random media

SRT8_interior1

n1565786504_30299121_4596169

Turkey_Run_039

2015_f250

FB_IMG_1524919612076

Ol' DIRTY GIRL

g2_gear_hammer_rear_diff_cover

BODY2

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Apr 23, 2025
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 906 (members: 1, guests: 905)

Top