Reply to thread

Message: [QUOTE="strokin'_tatsch, post: 1388790, member: 7"] Was almost finished rebuilding my Dana 60 and hit a snag. I replaced the inner axle seals and the axle shafts will not go back through the new seals. Has anyone run into this issue? I used Dana/Spicer 52148 seals. I went to the Ford dealer today to see what seals they offer for it and they are the same style seal and have the same problem with my stock shafts. The shaft will start through, but only go about 3/8" before they won't go any further. This happens with both shafts and both new seals. Are these seals really supposed to be this tight? I've rebuild several older axles and never had seals this tight before. Sent from my SAMSUNG-SGH-I337 [/QUOTE]

Verification

Random media

iphone_pics_708

Blue beauty

13_emblem

0208151604b

photo-4

1221141220

OBS_before_and_after

5526

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 490 (members: 0, guests: 490)

Top