Reply to thread

Message: [QUOTE="Hartwig, post: 1559751, member: 31929"] I go both ways. The bushings in the old rods are not segmented. I would prefer to install these. Apparently these are no longer available and only the segmented bushings are available. I have now ordered bushings AND rods to see which bushings are installed in the ordered rods. If it should be the segmented bushings, I then see at which point / orientation the segmentation sits. If I install the bushings myself and then fine bore them, I can also reduce the bore spacing a little and I no longer have to machine the pistons if the piston protrusion is too large. (For this rebuild I need 0.030"oversize pistons, 0.010" destroked. ) [/QUOTE]

Verification

Random media

Truck32

old trucks

Alumline

Diagram

pistons

20170417_142706

2013-01-06_16-43-53_166

2012-10-14_17-51-56_495

step_12-2

IMG_20120303_163649

MPD 6.7 Ford Budget Kit box 1

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 788 (members: 0, guests: 788)

Top