Reply to thread

Message: [QUOTE="Dewman, post: 1559892, member: 31544"] Long story short believe a lifter came apart and went through my loop. Replaced the long block. my hpop screen was not broke but In the last 2 years have replaced the ipr several times. I put a new one in it after the rebuild. I did go to a stock hpop (had an adrenaline) since the screen was not broke but there were elements in my ipr screen. I got a new tune since I moved to a stage 2 cam from stock on this long block. Now after it warms up it misses. Turbo whistle don’t sound as loud no more. I have seen code p2289 code icp to high engine off code As well I have to clear the dtc and then it will start. I checked the voltage at the icp and seen my 5v on only one of the wires and then I reversed it on the ground Side of the icp wire to battery and had good ground. Any thoughts. So just Incase it did not like the new tune I went back to my previous one that had everything on my mod list other Than the stage 2 cam. My livewire screen shot is when warm and missing. Thinking of replacing icp and exchange ipr. Ipr is motorcraft. Thanks in advance. [/QUOTE]

Verification

Random media

Switch

3E93If3N15L35N25F6d2ia9d9198b3f401a14

step_13-2

past & present

past & present

IMAG0331

2011-07-21_18-41-57_912

dirt_jumpin

joestruck4

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 611 (members: 0, guests: 611)

Top