Reply to thread

Message: [QUOTE="NEVRNF, post: 1514621, member: 709"] My truck just started having this issue. I had to replace the A/C Compressor and Condenser over the winter as the Compressor clutch locked up and it had damage to the condenser from getting the wrong dryer. I also replaced the Expansion valve as I got a kit that contained everything. Correct charge of Freon and dye added using a machine not cans. A/C works fantastic until it sits during the day at work. Turn it on and the compressor works and the fan locks up. Air out the vent is like 80*. I put my gauge set on it and it shows 30# low side and 200# high. If I wait until the sun goes down and the temp drops into the mid 80's same pressures but 45* vent temperature. It's been a long time since I did A/C work and most of my Experience was orifice tube based vehicles. Neve had much experience with an Expansion valve. Is it possible I have a bad valve? [/QUOTE]

Verification

Random media

truck_on_road

2012-10-13_18-10-24_385

IMAG0079

FullSizeRender1

photo-41

IMAG01631

08 rear door panel

22's

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 266 (members: 0, guests: 266)

Top