Reply to thread

Message: [QUOTE="superpsd, post: 1472894, member: 15821"] Should work better than a stock turbo. The stock turbo is a TP38 with a 1.10 turbine housing. It's a very loose housing to keep backpressure low and turbine speed down. There are two different turbine sizes for the 364.5. The larger 74/80mm or the smaller 68/76mm turbine. Also you will have turbine housing sizes to pick from for both turbine wheel sizes. The .91 or the 1.0 housing. The smaller housing is going to have a quicker spool. Housings are cheap so you can always bolt in the 364.5 with a .91 since you still have stock sticks and then swap to the 1.0 latter if needed. Turbine housings are pretty cheap about 150-170$ a housing. Swaan above is running the 364.5 with the injectors you are considering. I think he said his 364.5 was the smaller turbine. I'm sure he will chime in. [/QUOTE]

Verification

Random media

07 door wire

1997 ZF5 DRW

The Truck

99.5 7.3

IMG_20150122_111833_343

photo_7_

2012-04-21_12-27-59_993

17_1

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 273 (members: 0, guests: 273)

Top