Reply to thread

Message: [QUOTE="ford rules, post: 1037720, member: 8274"] This is my drain, it's the factory drain that I had to put a slight more bend into right down by the bung that goes into the pump. I don't think the drain itself is to restrictive but if it's pushed into the cover to far that could be an issue. Here's the drain [ATTACH=full]139110[/ATTACH] [ATTACH=full]139111[/ATTACH] It's kinda hard to see in the pics but it's tipped down on the exh housing just a hair. [ATTACH=full]139112[/ATTACH] [ATTACH=full]139113[/ATTACH] [ATTACH=full]139114[/ATTACH] Oil in the comp housing. [ATTACH=full]139115[/ATTACH] Why would I only be getting oil in the comp housing and not the exh housing? If the drain was backing up I'd think that both sides would show signs of oil or no? The truck has just a slight haze at idle out of the tail pipe, I have always just wrote that off as the 230/100 injectors. It's never had a hint of white smoke from burnt oil out of the exh. [/QUOTE]

Verification

Random media

srt1

PSN_GROUP_PIC

IMAG1039

2004 F250 Super Duty XLT Super Cab

SRT8_interior1

1997 ZF5 DRW

IMAG1026

Stock TDE1 Timing

Painted 08 pieces

dualIPR

Excursion

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

projectford

Total: 207 (members: 1, guests: 206)

Top