Reply to thread

Message: [QUOTE="lincolnlocker, post: 1255453, member: 944"] with what i said i was onto is close to working.. prolly couod be fine tuned with a add a leaf or a half of a add a leaf to just get a couple hundred more lbs of lifting capacity due to the soft ez ride springs.. so i was trying to come up with a temporary way to see just how much shimming is needed to accommodate the almost 2 inch lower on the drivers side lean and dug back to the broke ass kid mud truck days and got a couple hocky pucks to use as shims on the ends of the thick short bottom leaf spring. it did help the lean a little as i trimmed a bit to much off but it drastically reduced my hop. instead of a wider range of the hop, it only does it at exacty 41mph now.. so my theory is that the spring rate is to weak and i am thinking of either trying a stiff add a leaf or going with a shorter rear block and adding another set of factory leaf spring to the factory set there now.. i think i need shocks too... [ATTACH=full]155114[/ATTACH][ATTACH=full]155115[/ATTACH] live life full throttle [/QUOTE]

Verification

Random media

A02437BE-98EE-46D1-8489-7BD09C0B10BD

0023

Swamps Timing 1

2012-08-03_16-18-45_504

20160924_133912

FullSizeRender2

Big_Red15

Doing an Exterior Wash on her

lift

stolen2

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Total: 1,069 (members: 2, guests: 1,067)

Top