Reply to thread

Message: [QUOTE="range91, post: 381922, member: 6991"] I built a 4r100 tried using red eagle power packs had nothing but bad luck unless u make them shift so hard feels like the trannies going to fall out seems to be the only way to use those. I ended up machining pressure plates and using stock frictions with an extra one in intermediate,forward,direct and od. I use transgo hd shift kits and a few sonnax parts on top of those with a few of my own mods. Trans is behind early 99 with a 38r and hybrid injectors do believe 238cc. This was the first big power trams I did and had a few issues at first with the aftermarket clutches I talked about but has been good now for a year and half. Also this truck is plowed with in the winter with a 9'2 v blade with extensions. Converter I use has a billet cover and 6.0 pump which lowers the stall have had great feed back on these even in stock apps. If you take you time and so research u can build a solid unit for way less than 5k especially If if your not going for big power JMO [/QUOTE]

Verification

Random media

B440560A-CFF0-41C1-9C01-0F60F3EDDDFC

eleanor_part_two_27_

0235e4a2

stock when i bought her

081

A02437BE-98EE-46D1-8489-7BD09C0B10BD

axle_ratio_tag

094

Dearden Triples WOP

tran_720110116135837

First day of lift new tires and wheels

vajj_pos

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 263 (members: 0, guests: 263)

Top