Reply to thread

Message: [QUOTE="brian89, post: 351376, member: 4054"] i did this last weekend, dont plan on doing it alone!! get the right tools, a tranny jack, air tools, pb blaster and dont rush, sorry i didnt take pics but its pretty simple, and dont put the cross member under the trans until it is completely bolted to the drive shafts, transfer case/extention housing, and when putting a torque convertor on, make sure you spin it and it seats in the bell housing 4 times, and to take it off, dont try and pull the trans out past the tc, take the 6 bolts out of the fly wheel and take the tc with the trans at one time, oh and disconnect the batteries and make sure your creeper is good and lubed up and operational [/QUOTE]

Verification

Random media

IMG_20110903_182414

Big_Red3

IMAG0578

ICP_Flat

my stufff

Our 2.6 Sled Truck

2012-10-14_17-51-56_495

plati1

Joshua tree

eleanor_part_two_63_

Always changing to make it a home on the road.

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

Total: 755 (members: 2, guests: 753)

Top