Reply to thread

Message: [QUOTE="EDP, post: 897612, member: 1068"] Mis-Consumption again, it doesn't increase any pressure nor volume. Whatever is being commanded by the tune for Line is all that it will ever see since it does not control anything but turning on or off the direct clutch. Solenoids main purpose is smoothed out what tuners can not control, technical term of which it will hydraulically apply in less time. No there is no other way to go about same resolution for the hydraulic side and the bang for the buck this option can not be beat.!! EPC controls line pressure. And the main pressure pop off on the solenoid pack and in the pump is supposed to be 300psi. A failing transmission pumping metal into the epc will clog the epc and cause pump pressures to skyrocket. [/QUOTE]

Verification

Random media

Magneto_side_shop

1291077686468

F150 and F250

Busted Driveshaft OversizeLoad

Bella as puppy

maple_grove_104

2001_Durango

TNC_F350_KR_with_8x14_Loadtrail_Trailer_725_gallon_water_tank

eleanor_at_dereks_3_

photo_19

1996 F250 460

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 691 (members: 1, guests: 690)

Top