Reply to thread

Message: [QUOTE="Derek@Vision Diesel, post: 1344352, member: 344"] To condense a long story, we are interested in hearing others opinions. Truck has been to 2 other shops and a local ford dealership. Originally the customer was loading his H&S MCC tunes onto the truck and says he accidently selected an engine tune when it asked for the transmission tune. This then put it into a long spiral of issues. It comes to us with a brand new ECM and TCM after these other shops had it. Had a BD tap shifter (which was spliced into the wiring harness) and that wire has been put back to stock. Has a fresh John Wood 5r110 Towmaster. The issue was the same before and after the transmission. Reverse works perfectly. Put it in drive and it for a split second feels like its going to go into reverse and then locks up solid. Will not move at all, just like a transmission brake. [B]Range selector shows no issue. Only code: P1910 (reverse lamp control circuit open) Have updated all modules with latest tuning using IDS. Have loaded H&S tuning with success into both TCM and ECM. Communication through OBDII port with TCM is perfect. Trailer brake control module is currently in a fault state, working to fix that as we speak. Shouldn't really apply though[/B] Anyone have an idea on what could cause a 5r110 to bring in 2 clutch packs at the same time and essentially bind up other than a command to do so by the TCM, and how the TCM is commanding to do so with tuning we know is fine and a TCM that we know is brand new? [/QUOTE]

Verification

Random media

ImageUploadedByTapatalk1367426129_317571

securedownload_1_7_

DSCN8402

transmission_pic_2_2_

epic1

front_axle_swap4

aftermarket_headlight2

P1060060

Built_Up_Motor_1

IMG_20130404_212925_935

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 9:11 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 429 (members: 0, guests: 429)

Top