Reply to thread

Message: [QUOTE="adamquintonMDP, post: 607884, member: 10458"] i have put in and taken out 10+ trans and never had a real issue but this has be stumped. when i get the trans mated to the engine i am unable to rotate the flywheel to put the nuts on the TC. tonight it the THIRD time i have put in and taken out the trans on my truck. and am still unable to turn the flywheel i have as far as to put the starter back in and do it that way but not even that worked. i am lost I was told that the TC was not fully seated so i did everything i could to make sure that it was is there anything else i should make sure i do before i try this a fourth time.:cursing::cursing::cursing: O forgot to mention that im working on a 2006 6.0 and the trans came off the same year truck that was 4x4 and going on my 2x4. If that make a difference. [/QUOTE]

Verification

Random media

75295_123503404375468_100001474272705_142240_3478230_n

my truck

11-8-2014

1997 ZF5 DRW

CNG Setup

IMAG0337

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

IMAG0075

day i brought it home

IMAG0707

00L0L_3WVtnh66zIK_600x450

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 671 (members: 0, guests: 671)

Top