Reply to thread

Message: [QUOTE="Mark Kovalsky, post: 1455849, member: 1654"] If you leave the original filter in the pan and replace the bypass with the Dieselsite filter you won't get an effective system. The cooler lines only see 10% of normal flow until the trans warms above 165°F. Before that happens 90% of what normally goes to the cooler is redirected back into the trans instead of going to the cooler. And under most conditions once the thermostat opens, cool fluid from the cooler lowers the trans temp enough so that the thermostat closes again. So most of the time there is not full flow to the cooler. Sometimes aftermarket isn't as good as OEM. With the improved internal filter 100% of the fluid is filtered all the time. [/QUOTE]

Verification

Random media

IMG_20161130_080743835

Rear touch ups comin

FullSizeRender2

Xmas_05a1_024

gate_019

IMG_20130327_174431_727

Beeeeeeeer

he451ve compressor billet wheel

waxxxx

Latest posts

Gauge cluster face plates
- Latest: crash86
- Today at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Today at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Today at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

rusty1161

Total: 295 (members: 1, guests: 294)

Top