Reply to thread

Message: [QUOTE="kleake, post: 1389604, member: 25987"] This might be of help. Came out after work, tested all gears and all were right around 80psi. Drove home, tested again, 80psi. Did a stall test in reverse and pressure jumped up and then at idle it only went down to 125-130. Now all gears are 80 except reverse is 125-130. Is the solenoid sticking, or is there a valve that is sticking until after I do a stall test? Another thing, on the drive home the most I see is 125psi at highway speeds no matter how hard I stomp on it, is that normal or should it still increase with throttle? [/QUOTE]

Verification

Random media

harbor_freight_winch

BD96E951-D6BA-4930-B57B-861923C8984A

2013-03-05_10-51-27_609

2011-04-20_14-50-12_111

MG_6991

2013-01-31_21-06-33_882

after plasti dip spray

2003 F250 6.0

Expansion_SMK200

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

DEEZUZ

Total: 986 (members: 1, guests: 985)

Top