Reply to thread

Message: [QUOTE="jameson731, post: 1413098, member: 23467"] Had to change the brake line that runs from under the cab to the rear of the truck today on our company 03 f550 6.0 auto dump truck. After replacing the line I went to start the truck and absolutely nothing happened. Turned the key to on and everything works properly(can hear injectors, fuel pump kicks on, etc...) as soon as I turn to start it there is nothing. I can hear the starter relay click but that is all. The only thing I could think would cause this is either the starter or ignition switch. I tried jumping the starter with a screw driver and it will spin but won't engage to crank the truck over, just free spins. I'm leaning toward my problem having to do with the starter because of this. Prior to this happening today there has never been an issue with the truck starting at all. I tried starting it in neutral with no change, checked fuses and didn't see anything bad and switched others out with them just in case. Not sure where I should go from here. I did pick up a starter to try and swap in tomorrow. Any help would be greatly appreciated. Thanks. [/QUOTE]

Verification

Random media

My Truck

296389_290327937655506_163224943699140_1023108_1842020247_n

Kazakhstan

Door switches. Driver side

Pfm

IMG_20130501_022235_042

JD 4020

0171

blk_pipe2

silver_truck_under_hood_dual_pumps

Latest posts

I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Today at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Yesterday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 722 (members: 1, guests: 721)

Top