Reply to thread

Message: [QUOTE="Strokinbronco, post: 1542599, member: 30626"] I have a 04 6.0 and have had some issues lately that I'm having a hard time figuring out. Truck runs great, shifts good with no 3-5 flare but once in 6th it shakes horribly. I thought this was was in injector issue seeing as I just upgraded to a set of holders 190/30s but after running a power balance test I feel comfortable saying it's not an injector. So here's my issue, during the power balance test it threw a code for the direct solenoid stuck/ sticking, I pulled the pan and replaced the epc and direct solenoids as well as the plastic pressure switches with metal o- ringed ones. There wasn't any excessive clutch material in the pan but ther fluid did smell a little burnt. The problem only shows up when the converter locks so im stuck wondering if it actually is an issue with the direct clutch or if the converter is just going out on me. [/QUOTE]

Verification

Random media

motor_w_manifold

GT45R_install_pics_and_test_drive_020

PHP Timing map 1

torque_an_me_10-11_020

My rig

25541_1278049354748_1335447039_30914498_2349469_n

Misc_V-Drive_512

tshirt

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 184 (members: 0, guests: 184)

Top