Reply to thread

Message: [QUOTE="jonnysteals, post: 680921, member: 795"] My 6.0 was running fine until today. I parked it to run into the store real quick and now it won't stay running. It cranks and starts but sounds like its only running on a few cylinders. The rpms start dropping and the truck dies. I used my sct to check for codes and it's says none. I got it out of the parking lot by clearing the codes. It ran and drove fine back to the house. Now it won't restart. I pulled the front fuel filter and it's getting fuel. I got it to start once more by clearing the codes. While running I noticed the rpms were bouncing 200 rpm. While running it sounded fine besides the rpm fluctation. No smoke, oil fine, revs fine. Any suggestions it currently will crank, fire and sound like running on two cylinders and slowly die. No effect if I floor it and won't start even after clearing codes. I have no scanner either. Ficm 2-3 years old. Any help is great I currently have no clue have a buddy coming tomorrow with his Ficm to swap in. [/QUOTE]

Verification

Random media

Da_Limo

sept_29_10_171

17King1

20190810_125919

Pink_dance-taco

The rear

2011-11-20_12-57-40_303

IMAG0932

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 693 (members: 0, guests: 693)

Top