Reply to thread

Message: [QUOTE="HicktownCreations, post: 1257393, member: 18778"] Ok so i have a 2006 with what i believe is 66mm fixed geometry RCD charger and 150% injectors i believe are also RCD... All the mods were done by previous owner who wasn't much help on specifications. Full sinister delete kit and coolant filtration and oil filtration. FICMrepair.com FICM with the "herculeas" tune. and a 190hp tune from innovative. So the issues I'm having for example would be while trying to speed shift if I'm WOT throttle in third gear at 3200rpm as soon as I let off the accelerator and push in clutch to shift it keeps fueling to the point that it will rev out to the rev limiter. It acts like super high rail pressure on a common rail system. I'm not super familiar with the 6.0 just looking for some suggestions. It will even spike when the truck is on the stock tune in the same scenario not sure what route I need to go to get it fixed any information would be helpful thanks in advanced. Also it takes forever to get on top of the charger not sure if its an issue with the setup or just needs more attention to the tuning aspect. [/QUOTE]

Verification

Random media

IMAG0282_1

sw_vs_jd

20170502_213121

IMAG0675_1_

Always changing to make it a home on the road.

Pro_Comp_Steering_Stabilizer

Magneto_rear_v2

eleanor_part_two_14_

Minotaur Parameters

front_axle_swap91

front_axle_swap8

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Today at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Today at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

Patrick Feeley

Total: 1,203 (members: 1, guests: 1,202)

Top