Reply to thread

Message: [QUOTE="corn bread, post: 1497101, member: 29720"] Im not running the underside kit. Its P/N: 1450001. This kit ******s the horizontal egr cooler pipe and you install the gate behind the turbos where that would have connected. I've added a fitting to the hot side CAC pipe thinking that would be the closest place to get boost pressure from. Would make a difference having it on the cold side CAC pipe? I saw the H&S diagram and thats when I started have questions on how to run the lines. The H&S says to plug one port on the lower side of the gate and leave the other side open so the diaphragm can travel freely. Then It says to just run boost to the regulator and from the regulator to the top of the gate. But the Precision manual show running boost pressure to the regulator and to the bottom of the gate using a tee fitting to split the boost line to both. would it be best to just run boost to the regulator and not the bottom of the gate. Its a precision 46mm gate btw. [/QUOTE]

Verification

Random media

IMAG0128_1_

Alaska

Mexico

511-3

17King3

08 excursion

1997 ZF5 DRW

20150802_210301

ADautopsy1

20140114_135303

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 612 (members: 0, guests: 612)

Top