Reply to thread

Message: [QUOTE="BuiltPowerStrokeTough, post: 1077357, member: 14650"] I am finally able to attach a picture so I dont have to link to another thread, although Im not sure if it is letting me edit it anymore to remove the link. In the picture, I have put an arrow to the location which I wanted to put a 90 and a tube downward to vent to atmosphere. It comes right off the factory CCV oil separator box. Does anyone think if the factory CCV oil separator box is left in place, that it will cause too much of an increased pressure in the crankcase being that there is no longer going to be a vacuum from the intake pulling the vapors through the CCV box? And also, this thread is NOT meant to take away from any of the vendors that have the CCV kits out there. They did a dam good job on their kits and would love to own one! Im just looking for any info on possibly doing it this way instead of removing the CCV box. [/QUOTE]

Random media

KR 2008 64

08 350 cclb white

IMG_20130711_180257_891

Screen_shot_2012-01-29_at_8_37_29_AM

IMG_20141124_224943

2012-11-28_16-08-02_661_1_

P2220002

Truck_00000

My OBS E-Fuel system

My 2011 F250 Lariat

step_11-1

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 504 (members: 1, guests: 503)

Top