Reply to thread

Message: [QUOTE="rpm-inc, post: 530420, member: 93"] Well after getting all the wiring out of the donor truck, I decided to keep this as simple as possible..... I want to get rid of the abs. Any reason I can't just run the front and rear brake lines right from the master and use a proportioning valve? I hope so because I am stripping the harnesses down to the bare minimum. The only problem I can see so far is the pcm needs a speedo input, and that is generated by the abs module from the rear diff sensor. How can I convert it to something the pcm will recognize? I could use a van pcm. The vss signal goes right to the pcm, but then I think I would need a pcs to run the trans. [/QUOTE]

Verification

Random media

20130925_172656

IMG_20170728_164222564

truck4

6_4gate_003

110908-N-JH293-098

2011-06-24_13-31-45_718

2011-07-23_22_07_42

Dg_8002

Picture_075

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

Patrick Feeley

Total: 1,118 (members: 1, guests: 1,117)

Top