Reply to thread

Message: [QUOTE="Jeremy@dynoproven, post: 887336, member: 10706"] This was also posted by Jason on Tuesday.. "Some notes from Jonathan........ 300/200 P.I.S. injectors Honey Badger Jr. pump Jonathan tuning (PW was set to 3ms) Calling for 3000 psi at wot.. Pump help 3000 psi at 55% dc Truck did 588 on the dyno Next......... Upped the PW to 3.4ms Called for 3000 psi at wot Pump held 2850 psi at 58% dc truck did 596 next............... upped PW to 4ms called for 3000psi at wot pump went to 3000 psi then fell off the table to around 1800 (then again, every medium oil pump we tested did this)" [/QUOTE]

Verification

Random media

404497_3047082223674_457951947_n

1385598771752

2011-07-30_13-13-34_958

Tube_Tool

08 excursion

Stacks

Edge_CTS2

Morimoto D2S 5.0 Projectors

Dropped on 4800lb. coils and no blocks

IMG00009-20091015-1448

duals2

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- 44 minutes ago
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

Total: 303 (members: 2, guests: 301)

Top