Reply to thread

Message: [QUOTE="webb06, post: 1355423, member: 7680"] We recently had a truck in with a similar situation. Recent rebuild by the custom himself. Had Oreilly do all the machine work and he put it together. After rebuild it showed no oil pressure on the gauge but started and drove fine. When we got it we immediately check oil pressure with a manual gauge and at idle it was like 4psi and at 2000 rpm it was at 14psi. After pulling the engine out we found the freeze plugs for the lifter galley on the rear of the engine had been left out causing a HUGE low pressure oil leak but it was inside the rear cover that's siliconed and bolted on. Installed freeze plugs and checked all bearings in the lower end, removed heads and pressure checked valves to make sure valve guides and stem seals were okay and put it all back together. Problem solved. Oreilly ended up paying for that bill. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

6_7IC_Dyno_Logan

2013-03-21_18-00-02_49

uploadfromtaptalk1320025351052

2011-08-06_15-02-32_811

mpd_2

2013-01-06_16-43-55_918

front_axle_swap3

IMAG00421

CCV

uploadfromtaptalk1320025322225

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Yesterday at 9:11 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,040 (members: 0, guests: 1,040)

Top