Reply to thread

Message: [QUOTE="Patrick Feeley, post: 1164913, member: 2142"] Know what code was stored would help, but in the short term, I would probably inspect the harness connections at the valvecovers (1 front and 1 rear for each valvecover). If you disconnect each one, is there oil in the connector or any burned/melted pins? Also, remove the oil cap and sniff it. Does it smell like burned electrical insulation? If so you could have melting/burning of the Under ValveCover Harnesses (UVCH, there are 2 of them under each valvecover). To do a better inspection than the sniff test (quick and dirty), you would need to remove the valvecovers or perform the following: For each Valvecover gasket connection (5 pins each), you should not get any continuity from any of the 3 inner pins to either of the outermost pins or battery ground (indicates no shorts between injector wiring and glowplug wiring or ground). Cheers! [/QUOTE]

Verification

Random media

IMAG0084

stickers

The Discovery

2013-03-26_19-11-49_676

0181

20140930_185558

thumb_IMG_1324_1024

tex

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Friday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Jun 2, 2025
Aftermarket Super Duty 1999 - Current

Members online

No members online now.

Total: 941 (members: 0, guests: 941)

Top