Reply to thread

Message: [QUOTE="Patrick Feeley, post: 1125627, member: 2142"] Hopefully you did the external pigtails one wire at a time to ensure that the order remained the same. Break out the multimeter and try this: For checking the injector/glowplug wiring: From each valvecover gasket connection's outermost pins (2 per connector) to ground you should get 0.1 to 2 ohms (indicates good plug and wiring). From each valvecover gasket connection's center pin to each immediately adjacent pin, you should get around 3 ohms (indicates good injector solenoid and wiring). You should not get any continuity from any of the outer pins to the 3 inner pins (indicates no shorts between injector and glowplug wiring). You should also get 0 to 1 ohms from each of the external harness connectors outer pins back to the Glowplug Relay's large terminal on the GP side (indicates good wiring from external connections back to the relay). Other than that, you might need to check the wiring from the IDM connector back to the external VC plugs. Cheers! [/QUOTE]

Verification

Random media

2013-01-06_17-11-25_142

iphone_pics_288

torque_an_me_10-11_020

DSC0942-2337577917-H

IMG_20160814_104240964

bed bolt

My 2 main rides

SOTF

Latest posts

2000 f350 dually lariat
- Latest: ju015dd
- Today at 12:37 PM
7.3 Aftermarket
I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 1,022 (members: 0, guests: 1,022)

Top