Reply to thread

Message: [QUOTE="JCart, post: 1531642, member: 1238"] Nice to see other local on here! 3/8” backer rod is what I used and will on Tan White Tan truck soon. As I recall just need to remove the floor trim plate. Then gently pull the stock door jam seal rubber out. I also used steel fish tape, some black electric tape and soapy water. Carefully run fish tape through tube in door seal, be careful not to tear, helps to lay out in a straight line as possible. Then using tape attach backer rod to fish tape and wrap a ways down backer rod. Dampen with soapy water and carefully pull through door seal tube. Go slow and be careful not to tear B Rod or hole door seal. Re install, door will shut a little harder and you might have to adjust the striker post just a tad, until B Rod compresses. Cheers. j [/QUOTE]

Verification

Random media

elbow_1

Rear touch ups comin

2011-10-22_15-40-48_831

Smokyred

Screenshots 2

IMG_20130414_140925_233

photo_7_2

vajj

26213_365896378545_615243545_3684468_4612846_n

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 9:11 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 801 (members: 0, guests: 801)

Top