Reply to thread

Message: [QUOTE="RPScustoms, post: 1551996, member: 33551"] Been an ongoing project about 7 years. Started out as a 2wd FSD Automatic garbage truck. [URL=https://app.photobucket.com/u/rpschutte/p/77f84726-4f38-459c-bbda-193ac57229e3][IMG]https://hosting.photobucket.com/images/i/rpschutte/Screenshot_20201010-093118_2.png?width=960&height=720&fit=bounds[/IMG][/URL] At one point it was compound turboed with a turbo from a mack truck, some junkyard injectors and a welded diff, made a pretty fun burnout machine. [ATTACH=full]180193[/ATTACH] [ATTACH=full]180194[/ATTACH] Then it got 4wd swapped with a d60 and 4.10s with a yukon full spool in the rear. and eventually ZF5 swapped [ATTACH=full]180195[/ATTACH] [ATTACH=full]180196[/ATTACH] [ATTACH=full]180197[/ATTACH] fast forward a year and its got a 05 front axle and coilovers under it along with a 10.25 drw axle for the 8lug and full width [ATTACH=full]180198[/ATTACH] [ATTACH=full]180199[/ATTACH] [ATTACH=full]180200[/ATTACH] Then finally came a much awaited motor swap with one id been putting together for a while. Homemade t4 setup, Homemade stainless log manifolds, s475/83 1.10, FF 250/200s, smith bros pushrods, comp springs, budget e-fuel, hydra/jelich tunes, and a Southbend 650hp dual disc [ATTACH=full]180201[/ATTACH] [ATTACH=full]180202[/ATTACH] [ATTACH=full]180203[/ATTACH] [ATTACH=full]180204[/ATTACH] [ATTACH=full]180205[/ATTACH] [ATTACH=full]180206[/ATTACH] [ATTACH=full]180207[/ATTACH] The truck has been an absolute animal for the last year or so, finally decided to spit an input shaft out of the old tired zf5-42 [ATTACH=full]180208[/ATTACH] [ATTACH=full]180209[/ATTACH] [ATTACH=full]180210[/ATTACH] [ATTACH=full]180211[/ATTACH] Midwest Trans is about 3 weeks out on a full build with cryo treated internals, so I have some time for a few projects ive been putting off, Intercooler install with irate pipes, rear diff re-gear with 3.73s to match the front finally, 16" alcoas on the front, rear sway bar install, 1.0 ar exhaust housing, superduty uvch swap, vac pump delet pulley, exhaust backpressure gauge install, and some other odds n ends. cant wait to have this thing back on the road. Expecting a steel flatbed at some point this summer as well. [ATTACH=full]180212[/ATTACH] [ATTACH=full]180213[/ATTACH] I will not be running the stock plactic IC its just there for fit-up [ATTACH=full]180214[/ATTACH] [ATTACH=full]180215[/ATTACH] [ATTACH=full]180216[/ATTACH] [ATTACH=full]180217[/ATTACH] [ATTACH=full]180218[/ATTACH] [ATTACH=full]180219[/ATTACH] [ATTACH=full]180220[/ATTACH] [/QUOTE]