Reply to thread

Message: [QUOTE="zilla68, post: 49053, member: 1410"] not really, I was so pissed at mine because the temps were right where yours were, so I thought hell, I replaced everything but the switches, might as well do those. I pulled the panel off the dash, and even though it had never been off before, it wasn't holding pressure. I pulled the vacuum lines loose and stuck a mighty vac tool and found out that way. You might have someone inside the truck with it running, and your on the passenger side under the hood, right by the hinge, and watch the vacuum module when they switch to max a/c and see when it activates and if its holding. Mine wouldn't pull all the way in, and after the new switches, that thing would suck a golf ball thru a garden hose! I bought mine from partsguyed.com for like 50 bucks I think it was, for all of them, but I didn't replace one of them. I think I replaced the middle and the right IIRC [/QUOTE]

Verification

Random media

30ea3c13

IMG_0310_for_PSA

diamond eye exhaust 5

DieselSite Coolant Bypass Filtet

935345_10151587373928866_2074320702_n

eleanor_at_dereks_4_

wopgate

ex_long_block

20140325_095243

No Caption needed

DE_4_Pipe

Latest posts

4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- 56 minutes ago
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

6.0 Tech

Total: 511 (members: 1, guests: 510)

Top